How to fix the frame of a stainless steel shower room?

When buying a stainless steel shower room, many people do not know its installation method and choose to have it delivered to their doorstep and installed, but they have to pay the installation fee themselves. In fact, it can also be installed by oneself, which not only reduces costs but also ensures quality. The important thing when installing a shower room is to fix the frame. As long as the frame is fixed properly, the subsequent steps will be relatively simple. Therefore, today the shower room manufacturer will teach you how to fix the frame of a stainless steel shower room, hoping to help you~

The step to fix the border is to find a hole and then fix the border, but fixing the border is more complex and involves many steps, so we will proceed step by step:

1. Determine the location of the borehole

Place the border against the wall, use a tape measure and pencil to determine the position of the drill hole. Once the tape measure confirms the correct position of the drill hole, use a pencil to mark it on the wall.

2. Punching holes

After determining the position, start drilling. After completing the shallow hole drilling according to the markings made in the previous step, use an impact drill to drill a deeper hole on top of the previously drilled shallow hole.

3. Install adhesive particles

Before nailing screws into the wall, it is necessary to install expanding rubber particles in the drilled holes, as this can better tighten the screws. Then, use a hammer to knock the rubber particles into the drilled holes.

4. Fixed border

We have started fixing the frame. After completing all the previous steps, you can install the frame of the stainless steel shower room. Among them, the bottom frame should be placed on the water barrier, and the screws should be driven into the wall with an electric screwdriver to fix the frame

。